 |
Keg Master
Series 3
This is a the "must have" unit for anyone who is serious
about kegging. It comes complete with drip tray, dual tap fount,
regulator and much much more.
* It can fit 3 x 19-20L postmix kegs (cornelius kegs, soda kegs)
or one 50L commercial keg (Tooheys, CUB, XXXX etc).
* Our 2.6kg Australian Standard cylinders will fit inside the fridge
and still fit 3 x postmix kegs or a commercial 50L keg at the same
time. The fridge also comes with a external CO2 cylinder bracket
just in case you prefer to mount the cylinder on the outside of
the fridge. This makes it a little easier to make fine adjustments
to the regulator pressure without having to take your kegs out each
time you do it.
(more
information)
$799.00 each
Add
to Cart
|
 |
11
litre stainless keg (ball-lock)
Great for a party keg, or for those who make smaller batches
Dimensions - 280 diameter x 300mm H
$165.00
each
|
 |
Keg
King CO2 Bottle 2.6kg
Steel Bottle
containing 2.6kg of CO2, supplied full. One of the most conveniently
sized and best priced CO2 bottles available on the market.
$199.00 full
Add
to Cart
|
 |
23 litre
stainless keg (ball-lock)
The
perfect size to take an entire single batch
Dimensions 280 diameter x 400 H
$195.00 each
|
 |
Post
Mix Kegs - 19 litre second hand (ball-lock)
These kegs are
second-hand, and may have small dents, stickers and post mix syrup
residue inside. Otherwise in working condition - all kegs we sell
have had the post o-rings replaced.
Approximate
dimensions of post mix kegs
220mm in diameter
635mm high (to top of handles)
615mm
high (to top of posts)
approx 660 mm height clearance
is required in your fridge, including room for the disconnects.
$75 each
Add
single keg to Cart
$70 each (must purchase 2 or more)
4 keg deal
with replacement seal kits - $270.00
Add
to Cart
|
|
|
 |
Micromatic
CO2 Regulator
Service kits
are available for this top quality regulator, however we still recommend
a non-return valve. This is what we use for our own brewing.
was
$110.00
now $99.00 each
|
|
Regulator
Cage - stainless steel
Fits to micromatic
regulators to protect the gauges from damage.
$49.95 each
|
|
|
 |
Fizz
cap
Attaches to
PET beer bottles, and also coke/lemonade soft drink bottles to allow
you to connect a ball-lock gas in disconnect to force carbonate
beer, softdrink etc
or just re-pressurise the bottle to prevent it from going flat.
$39.95 each
|
 |
Fridgetap
Set
Beer dispense
tap to be fitted through the wall of a fridge. Drill a hole, secure
the tap with the backnut and it's ready to attach some beer line
and a beer out disconnect.
$85.00 each
|
 |
Handheld
Beergun Stainless Steel
A hand-held
beergun, for those who don't want to put a hole in their fridge.
Also good for partykeg systems.
$85.00 each
|
 |
Bronco
Dispense tap
The least expensive
tap we have, just add some beerline and a disconnect. Perfect for
Partykeg systems, or for those starting out on a budget.
7.95 each
|
 |
Picnic Tap Set
Pre-made tap, hose and beer
out disconnect.
$19.00 per set
|
 |
Keg Charger
A cost effective way to dispense beer from a
keg without purchasing a regulator or bottle, one CO2 bulb will
dispense one 19 litre keg. Not suitable for force carbonating kegs.
$39.00 each
|
 |
CO2 Keg Charger
Bulbs - 5 pack
Bulbs for the
keg charger, one bulb will dispense one keg. Not suitable for force
carbonating kegs.
$19.90per 5 pack
|