Male Camlock to Male BSP 1/2"

$15.95 ea

1/2" 3 piece Ballvalve - Full bore
$29.95 each

1/2" Male Camlock to Female BSP
$12.95 ea

1/2" 2 piece Ballvalve - Full Bore
$24.95 ea

1/2" Male Camlock to Hosetail
$12.95 ea

1/2" 2 piece Ballvalve - reduced bore
$19.95

1/2" Male Dustplug
$11.95 ea

SS Locknut 1/2" BSP
$3.50

1/2" Female Camlock to Hosetail
$16.50

SS Solid plug 1/2" BSP
$ 12.00 each

1/2" Female Camlock to Female BSP
$15.95 ea

SS Plug (non-solid) 1/2" BSP
$5.00 each

1/2" Female Camlock to Male BSP
$15.95 ea

SS Cap 1/2" BSP
$12.00 each

1/2" Female Dustcap
$15.95 ea

1/2" BSPM to 1/2" (12.7mm) Tube Compression Fitting
$29.95 each

15mm (1/2") Socket fitting
$5.90 each

15mm (1/2") Hex Nipple Fitting $5.90 each

Reducing Nipple 3/4" to 1/2"
$6.50

1/2" BSP Hosetail
$7.50 each

Reducing Socket 3/4" to 1/2"
$6.50 each

1/2" Elbow - female to female
$4.50 ea

Reducing Bush 3/4" to 1/2"
$5.00 each

1/2" Elbow - male to female
$5.50

T-piece F/F/F 1/2" BSP
$5.90 each

Bulkhead - Stainless

Weldless bulkhead to add a ball valve to a vessel. Supplied with heatproof silicon seal & locknut. Requires a 23mm hole drilled.
Presents a 1.2" BSP parallel thread inside and outside when fitted.

50mm suits up to ~20mm wall thickness
$39.95

75mm suits up to ~45mm wall thickness
$44.95

100mm suits up to ~70mm wall thickness
$49.95

Kettle Skin Fitting
For adding a male 1/2" BSP or NPT threaded thermometer or
probe to a pot.
Presents flush fitting on the inside of vessel, with no thread on the inside. Available in two styles to present either male thread or female thread on the outside of the vessel.
Male Kettle Skin Fitting Set
$29.95 each

Female Skin Fitting Set
$29.95

Weldless Thermowell

For adding a thermowell to a pot or other thin walled vessel, fits from the inside with no thread to harbour bugs. Supplied with high temp seal washer & nut. 6.5mm interior diameter for probe (fits our stocked temperature controllers).
23mm hole required.

100mm overall length
$44.95 ea

200mm overall length
$44.95 ea

Exterior-insert thermowell
SS 1/2"BSPM
To allow controller probes that are not waterproof to be inserted into a vessel.
Internal diameter 6.5mm
$29.95 each

100mm

Interior-insert thermowell
SS 1/2" BSPM
Good for mashtuns, as it is inserted from the inside of the vessel, it excludes mash material from the threaded area in the socket attachment.
Internal diameter 6.5mm
$29.95 each

50mm

Stainless tube with Chrome plated brass nut/nylon olive compression fitting (female).$9.95 per set
BRASS IS NOT SUITABLE FOR USE WITH HARSH CLEANERS OR CHEMICALS

Stainless tube with twin ferrule stainless steel compression fitting (male)
$39.95 per set

Reducer Nipple 3/4 to 1/2" BSP BRASS

$3.50 each

Clipon hose connection to 3/4" BSPF
BRASS

$6.95 each

1/2" Kingco Nut with Nylon Olive
BRASS
$2.50 each

Clipon hose connection and adaptor
BRASS $10.50 set