NASA burner

This is the legendary NASA burner, reknown for it's simple brute power (and accompanying noise level). Few burners can match the performance of this little beauty on such a budget.
Comes with it's own stand, requires a hose and regulator.

This burner requires a minimum of the medium pressure adjustable regulator to run effectively, and is powerful enough with this combination to boil up to 100 litres.
It will not run properly with low pressure regulators.
(Please note: The main cast iron body of the burner is painted by the manufacturer, and will burn off paint during it's first use, sometimes causing the gas ports to block. A quick dismantle and wirebrush will clean away any burnt paint residue. Removing the burner from the frame can be achieved by removing the bottom nut and centre screw from the burner, and lifting the assembly out of the frame. It should not be necessary to do this more than once.)
This burner is suitable for OUTDOOR USE ONLY

$49.95
Sorry, this item is currently out of stock
until further notice.

Italian Spiral Burner

A powerful burner with a sturdy frame, suitable for larger boils. Quieter than the NASA burner with better flame spread, can be used with either the LP adjustable regulator for up to ~70 litre boils, or the Medium or HP reg for those massive boils that need some real grunt (may require custom mounting for use with med-high pressure regulator, please speak to your gas fitter).

$94.95

Mongolian Burners
This range of low pressure burners produce a huge amount of heat, (23 & 32 come fitted with pilot light burner). Burner is supplied as you see here - will require additional parts and gas fitter to install.
Available in 10 jet, 23 jet and 32 jet configurations, these burner bodies require custom fitting with relevant consideration for the amount of heat they generate, both in terms of mounting and a suitable vessel. Each gas outlet has it's own little venturi jet to mix air with the gas, which allows massive heat production at low gas pressure. With the optional Natural Gas jet conversion these burners are also suitable for use with NG.

10 jet $ 62.00 Add to Cart
23 jet $115.00 Add to Cart
32 jet $ 155.00
Sorry, 32 jet out of stock until December

These burners are suitable for OUTDOOR USE ONLY, using LOW pressure regulators only.
Your licenced gas fitter will be able to advise you on installation appropriate for your circumstances.

Low Pressure Adjustable LPG Regulator

2kg/hour, adjustable low pressure regulator suitable for either burner depending on your heat requirements. Supplied standard with a 1.8 metre hose.

$49.95 Add to Cart

(Please note that this regulator is not suitable for use with BBQ's or similar low pressure equipment)

Medium Pressure Fully Adjustable LPG Regulator

The most versatile regulator we have now, this regulator is adjustable from
0 kPA (no gas flow) to 207 kPA. Suitable for small boils all the way up to 100 litres. Perfect if you're doing standard (23-25 litre) batches now, but think you might upgrade to double batches later.
Standard POL connection to LPG bottle, 1/4" connection to burner.

(Please note that this regulator is not suitable for use with BBQ's or similar low pressure equipment)

with 1.8m hose
$64.95 Add to Cart

with 3.0m hose
$74.95 Add to Cart

High Pressure Regulator

The brute force regulator of the range, this high pressure is used to get the best performance from the NASA burner, is supplied fitted with an 1.8m hose and also a needle valve fitted between the regulator and the hose so you have fine gas flow adjustment well away from the burner so it doesn't get hot!

$79.95 Add to Cart

(Please note that this regulator is not suitable for use with BBQ's or similar low pressure equipment)

2400W element 1" Boss

Overall Length: 290mm

$75.00 (does not include socket pictured)
Add to Cart

Please note: This element must be installed by a licenced electrician, We highly recommend the purchase of a
safety RCD (residual current device) for use with this item.

3600W element 1" Boss

Overall Length: 185mm

$85.00
Add to Cart

Handheld Immersion Heater 2400W

With an adjustable height hook to adjust to suit your vessel.
Requires 100mm minimum water level, can be submerged up to 300mm.

Overall length: ~500mm

We highly recommend the purchase of a
safety RCD (residual current device) for use with this item.

$120.00
Add to Cart

240V 20A Residual Current Device (RCD)
Hardwire Version

Using pumps/controllers etc in your brewery? Don't take un-necessary risks with your life in wet areas or outside,
use an approved RCD.

This device monitors the power flow, and if a fault to earth develops will cut the power supply within 30 milliseconds (less time than a sngle heartbeat) to minimise the risk of electrocution. This version is wired onto the lead to replace the original powerpoint. Licenced electrician to fit only.

WE HIGHLY RECOMMEND THE PURCHASE AND USE OF THIS DEVICE WITH ALL EQUIPMENT REQUIRING MAINS POWER IN YOUR BREWERY.
We use these safety devices in the workshop and on our breweries.

$29.95 each

240V 20A Residual Current Device (RCD)
'Piggyback' Version

Using pumps/controllers etc in your brewery? Don't take un-necessary risks with your life in wet areas or outside,
use an approved RCD.

This device monitors the power flow, and if a fault to earth develops will cut the power supply within 30 milliseconds (less time than a sngle heartbeat) to minimise the risk of electrocution. This model plugs into the wall, and your device plugs into it, hence 'piggyback'
WE HIGHLY RECOMMEND THE PURCHASE AND USE OF THIS DEVICE WITH ALL EQUIPMENT REQUIRING MAINS POWER IN YOUR BREWERY.
We use these safety devices in the workshop and on our breweries.

$29.95 each